From the manufacturer
Built upon the cutting-edge Z-Wave Plus chips, WallMote Quad can be used anywhere in your home, it offers a fine-tuned antenna capable of communicating over an open range of over 100 metres / 382 feet.
It is capable of controlling your whole home, so you may not even be present to see things change when you press WallMote Quad’s touch glass. But you will feel the change. WallMote Quad’s haptic engine confirms your every action via a click sensation.
Battery powered but without the need to ever change a battery, WallMote Quad is powered by a rechargeable lithium battery designed for smartphones. It recharges just like a smartphone too via the provided micro USB cable.
WallMote Quad is not just portable, but perfectly balanced. The minimalist design of WallMote Quad measures just 7.7cm wide and a slender 1.9cm deep (3.0 x 0.4 inches).
WallMote does not just offer control on tap. Each button is touch sensitive, meaning you can access new commands and control scenes simply by holding your finger a little longer.
Press and hold. Swipe up. Swipe down. Tap. Through capacitive touch, each of these lets WallMote Quad do something different. Dime lights on a whim. Open curtains to let in a little bit more light. Through the power of touch, WallMote Quad does not just offer whole home control, it offers precise control on demand.
Tap to control a single Z-Wave device from WallMote or press and hold for advanced controls. Once pre-set, WallMote Quad will keep working to control a single Z-Wave device even when the hub goes off-line.
WallMote Quad can be set to trigger the scenes and automate your home with Z-Wave technology. Group Z-Wave and other connected devices together via your gateway and activate them via WallMote Quad.
WallMote is the wall switch that you can install anywhere. Wirelessly.
Whatever the room, whatever the wall, WallMote is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.
To install WallMote Quad, you can affixe the mounting plate to any wall or surface using custom mounting tape. Simply place it in front of the mounting plate and it will magnetically attach.
Control up to 16 scenes.
Control a light. Control a room. Control a home.
Because WallMote Quad communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can. If it is connected to your gateway, simply add it to a scene that WallMote Quad can control and it is on top.
Tap, Press and Hold, Swipe up, Swipe Down. Each button of WallMote Quad holds up to 4 different settings for you, that means you can control up to 16 devices/scenes in your house.